Gas fryer on cabinet with 2 doors 2x17L 800x900x850mm 33kW

2 17-litre tanks in AISI 304 stainless steel, 1.5 thick, fully rounded and cast in one piece. The top is printed and provided with a wide rounded interior with a large area of ​​oil expansion, to avoid any overflow during cooking and handling of the baskets. The drain tap is in chrome-plated brass and the discharge also occurs in a steel bowl with stainless steel filter housed inside the appliance. Heating is carried out through the flame tubes placed inside the tank for a better heat exchange. The heating is produced by high thermal efficiency burners with excellent productivity and reduced consumption. Equipped with mechanical valve and safety thermocouple that guarantee a specific power of about 1.0 kW per litre of oil, to allow a rapid rise in temperature of the oil in case of food load during cooking. Piezo ignition of the pilot light with independent battery. The temperature of the cooking oil is controlled by a solenoid valve for supplying gas to the burners, which provides an immediate response to temperature drops due to the introduction of the load. The maximum working temperature is set at 190°C and a safety thermostat interrupts the gas flow in the event of a fault that would bring the oil temperature above 235°C. The sensors of the working and safety thermostats are both fixed in the tank and carefully protected against accidental impacts. Magnetically closing door in AISI 304 stainless steel. Height-adjustable feet in AISI 304 stainless steel.